The towel bar in your bathroom needs the best anchors to hold well on the drywall and prevent your towels from falling. So, if your towel bar keeps falling, the anchor is weak because you didn’t fasten them well. This problem can also result from the towel bar not being screwed directly to the wood studs.
You should consider replacing the light-duty plastic anchors with heavy-duty anchors to prevent the bar from falling. Alternatively, you can reinstall the old towel bar but fix the damaged holes. Remember, if the towel bar keeps falling, it will destroy your wall by leaving scars.
If your towel bar keeps falling, this article will help you understand how to fix it and have it last longer.
How To Fix Loose Towel Bars By Replacing The Anchor?
If you want to fix the problem permanently, it’s advisable to replace the anchors with better ones that will last longer. You can achieve that by;
- The first thing you should do is to loosen the set screw that holds the mounting plate in place. Then remove the post and towel bar. After that, unscrew the mounting plate to give you an easy time removing the anchors.
- After that, you should install heavyweight anchors to enable the towel bar to hold well. Use ¼ inch, tubular plastic anchor, on a tile wall to have it hold better.
- Also, enlarge the hole where you’ll lace the mounting plate. Make the holes using a ¼ carbide glass and tile bit.
- Then put the plastic anchors in place and screw the mounting plates.
How To Repair Loose Towel Bar?
Alternatively, you can opt to repair the loose towel bar. You can do that by;
- You should first select the right toggle bolt for repairing the loose towel bar. Remember, these bolts come in varying sizes, which can be confusing to select. To have an easy time picking the right toggle bol,t check on the drywall thickness to enable you to select the best length. Also, consider the size of holes on the drywall. This will enable you to pick the right toggle bolt wide enough to fit in the hole.
- Detach the loose towel bar from the wall.
- Clean the attachment plate for the towel bar. This is if your towel bar has a different plate that attaches to the wall before you fix the arm that is tightened onto the mounting plate.
- After that, you should make the holes that hold the mounting plate larger. This will enable you to fix the toggle bolts.
- Then fix the toggle bolts on the mounting plate. You should slide the screw on the mounting hole by threading it to the other side.
- Let the spring-loaded section of the bolt go deep into the wall to enable it to spring open well.
- After that, use a screwdriver to tighten the bolts. Ensure you don’t overtighten them.
- Install the holder bracket to the wall using a flat screwdriver to tighten the small screw.
- Then attach the towel bar to the holder bracket.
- Fix the towel bar’s other side into the bracket and tighten the screw on the wall to hold better.
- After that, you can test if the towel bar is functioning well. If not, it’s best to replace the towel bar to have it last longer.
Do Towel Bars Need a Stud?
It’s advisable to anchor a towel bar on studs to enable them last for long. However, if your wall doesn’t have studs where you want to fix the towel bar, you should ensure the screws get a perfect anchor in the drywall. Avoid using cone-shaped plastic anchors, which will loosen faster. Instead, go for the strong metal toggle anchors, which can resist any kind of force applied when deep in the drywall.
Which Are the Best Drywall Anchors to Use When Fixing Loose Towel Bar?
If your wall is made of drywall, it will look smooth as it consists of compressed gypsum. However, you will have challenges inserting a screw on it; in most cases, the wall will crumble. So, if you fix a towel bar in such a wall, it will become loose and fall.
It’s best to use drywall anchors designed to go through the drywall panel as they create enough pressure to hold the anchor in place. Look for a heavy-duty or medium-duty anchor that can hold the towel bar you’ve got without it falling.
Bottom Line
When your towel bar keeps falling off, it will inconvenience you as your towel will get dirty or wet and leave scars on the wall. It’s best to replace the towel bar or fix it by tightening the loose bolts. It’s advisable to use a heavy-weight anchor on the drywall to keep the towel bar in position for the longest time.
